Frequent question: How much does a Powerglide transmission weigh?

Weight-wise, ATI’s lightest Powerglide in a Supercase is 100 pounds, a standard weight Powerglide in a Supercase is 120 pounds, and an OEM-cased Powerglide is roughly 105 pounds.

How heavy is a 2 speed Powerglide?

Registered. Bill on average you can assume 160-165# for a wet Aftermarket cased glide / 9″ converter.

How much does a Powerglide torque converter weigh?

Race car builders oftenconsider the Powerglide first because of its light static weight, strongbuild qualities, and relatively low rotational mass. A typicalPowerglide often weighs about 100 pounds (plus or minus 10 pounds,depending on the equipment and whether it has a direct-drive pump or atorque converter).

How much power can a Powerglide transmission handle?

At $4,875, this race-prepped ‘Glide costs more than your average 4L60E rebuild, but this is no ordinary transmission. “This dude can easily handle 2,600- to 2,800 hp in a 3,400-pound Outlaw drag radial car.

Are all Powerglide transmissions the same?

Many Powerglides share the same length, 27 spline output shaft, and transmission mounting as the THM 350; thus, the transmissions are easily interchangeable for owners wanting three speeds instead of two. Other Powerglides came with an incompatible 16 spline output shaft.

INTERESTING:  Question: How do I charge an electric car if I don't have a garage?

Why is the Powerglide so good?

In fact, a Powerglide can weigh less than a standard manual transmission, provide a direct-drive feel with minimal slippage at the torque converter (or none at all with direct drive), and maintain a relatively low rotating mass. Many Street Stocks, I.M.C.A.

What is so special about a Powerglide transmission?

Powerglide was the first automatic transmission available on a low-priced car. As well as the last of its kind almost a quarter century later. Yes, the Powerglide’s longevity was legendary, both in terms of its three decades of utilization, as well as its durability.

How much does a 4L80e transmission weigh?

What Does 4L80E Mean?

GM Transmission Weights
Transmission Weight (LBS)
4L60E 155
TH400 130
4L80E 187

How much does a TH400 transmission weight?

The TH400 is 24.37” long and comes in at a weight of 135 pounds dry. This transmission does vary in the amount of fluid required, based on certain specifications such as which torque converter is used. That being said, a common fill volume is between 11-12 quarts for a stock transmission.

How much does a TH350 transmission weight?

The TH350 was also known for its quite short length, with an overall length of 21.75”. That also converts into a lighter transmission that carries a weight of 120 pounds. The TH350 takes about 4 quarts in the pan, and then requires additional based on the torque converter being used.

Will a powerglide bolt up to a 350?

Registered. The powerglide should be fine with the 350 unless it is an air cooled version.

How do I know my powerglide ratio?

The mark on the input shaft should have made 1 3/4 turns and be pointing to 9 o’clock if it is a 1.76 ratio. If the mark on the input shaft turns 1 13/16 turns and is pointing towards 10 o’clock, it would be a 1.82 ratio.

INTERESTING:  Can a rock chip in a windshield be repaired?

How much horsepower can a 350 transmission handle?

The Stage 1 TH350 is rated up to 450 hp. Those seeking something a little stronger can check out the Stage 2 version (PN PA35102) that holds 550 hp and retails for $1,500 with a real world street price of $1,175 from most vendors.

What’s better Powerglide or TH400?

In these types of applications, a Powerglide is the ultimate in consistency as well. On the other hand, for cars that will see any street time at all, a TH400 is a better option. In race cars, compared to a Powerglide a TH400 is better suited for cars with large tires and taller rearend gearing.

How strong is a Powerglide?

Today, powerglide transmissions are reliable up to as much as 3000 horsepower in certain applications. The backbone of this entire system is the planetary gear assembly.

Who builds the best Powerglide?

BTE leads in building high performance powerglide racing transmissions. As one of the world’s largest suppliers of racing powerglide transmissions, powerglide components, and powerglide service support, we have everything you need to make your race car, monster truck, or off road vehicle quick and dependable.