Your question: How much is a c6 transmission worth?

How strong is a C6 transmission?

As mentioned, the C6 transmission is quite strong and was paired with many of the larger V8 engines from Ford. This 3 speed automatic transmission was designed to handle up to 475 lb-ft of torque, although the C6 with the aftermarket upgrades used for drag racing can handle significantly more torque.

How many speeds is a C6 transmission?

The C6 transmission is a three-speed that appeared in most Ford trucks between 1960 and 1997.

What’s better C4 or C6 transmission?

The C4 transmission was primarily used in cars. The C6 transmission could handle more power. Due to the ability to handle more power, the C6 transmission was used in many Ford trucks with bigger engines, and in larger cars that were manufactured with bigger engines.

How do I identify a C6 transmission?

The bell housing gradually tapers down in size from the back of the engine to the center, or “body,” of the transmission. Look for a seam between the bell housing and the body of the transmission. If no seam exists, the transmission is a C6.

INTERESTING:  You asked: What does it mean bumper to bumper coverage?

How much HP will a stock C6 handle?

According to Kokonis the company uses stock input shafts for applications up to 1,000 hp. Pushing past that limit requires the CK Performance billet input shaft. Other standard modifications are stronger C6 planetary carriers.

How do you beef up a C6 transmission?

You can try the following to beef up the performance of your C6 transmission:

  1. Custom Parts. …
  2. Valve Body Upgrades. …
  3. Bell Housings. …
  4. C6 Planetary Carriers. …
  5. First and Reverse Planetary Gearset. …
  6. Lincoln Drum. …
  7. Aftermarket Clutches. …
  8. Gear Ratios.

Will a Ford 302 bolt up to a C6 transmission?

unless you are very lucky you will not find a c6 to fit the 302 block.. That’s a fact. There are only about 3 or 4 million of them scattered around scrapyards, hidden behind barns, or riding around on the roads and whatnot.

What replaced the C6 transmission?

4R100. The E4OD was updated in 1998 and this new transmission was the last rendition of the C6.

Will a C6 transmission bolt up to a 460?

Diesel Trans to 460 Engine: For those of you who have a C6 automatic behind the diesel, it’s really just a 429/460-pattern case; throw away the factory-installed trans-to-diesel engine block adaptor plate, get a 460 Ford separator plate, and bolt everything directly up to the 460, using a 460-pattern auto trans …

What engines bolt to a C6 transmission?

The C6 was produced with four basic bell-housing bolt patterns over its long production life and is a very rugged transmission designed for high-power applications. The round six-bolt pattern is for FE-series big-blocks such as the 332, 352, 361, 360, 390, 406, 427, and 428 engines.

INTERESTING:  What are the first 2 things you should do before starting the engine?

Can you add overdrive to a C6 transmission?

Adding overdrive to a C6 is physically impossible, but the 4R100 can donate its forward planetary gear set for shorter first and second gear ratios. This creates a “wide-ratio” C6.

How heavy is a C6 transmission?

Materials, Size & Weight

Thanks to these cutting-edge materials (for the 1960’s), the dry weight of a C6 transmission is 140 lbs, plus 30 lbs for the torque convertor. It requires 7-quarts of Type FA transmission fluid with the stock pan, plus an additional 2–4 quarts for the torque converter.

How much power can a C4 transmission handle?

I’d say at least 400 ponys as long as it is in good shape.