Dip the tip of your index finger into the fluid on the dipstick and rub the fluid between your finger and the tip of your thumb. The transmission fluid on the dipstick should be pinkish and almost clear. If it looks or smells burnt or has particles in it, have a mechanic drain and change the fluid.
How do I know if my transmission fluid is low?
Signs of Low Transmission Fluid
- Noises. If your transmission is working properly, you shouldn’t hear any noise while you’re driving as it should transition smoothly. …
- Burning Smell. Any foul smell coming from your car should direct you to your nearest service center. …
- Transmission Leaks. …
- Slipping Gears.
Does the car have to be running to check the transmission fluid?
Step 1: Leave the engine running and open the hood to your car. The car must be warm when you check transmission fluid. Step 2: If you have an inline engine, look behind your oil dipstick, toward your windshield, to locate the transmission fluid dipstick.
What is the proper way to check your transmission fluid in your car?
To check your automatic transmission fluid, follow these steps:
- Pull out the dipstick. With the engine on and the gearshift in Neutral or Park and the parking brake on, let your engine run. …
- Check the fluid. …
- Wipe the dipstick with a clean, lint-free rag; then reinsert it and pull it out again.
Can I check transmission fluid after driving?
WARNING: Checking the transmission fluid level requires working under the hood of your car with the engine running. … The easiest way to do this is to check the fluid level right after driving the car for a while. Hold your foot on the brake, and work the shifter slowly through the gears.
Can I just add more transmission fluid?
You can add more by inserting a funnel into the tube the dipstick was withdrawn from and pouring a small amount of automatic transmission fluid into the pipe. Check the level each time you add a little until the level is right between the two lines.
Will adding transmission fluid help shifting?
Whether you have a manual or automatic transmission, transmission fluid is essential for smooth shifting. It’ll also extend its life by protecting the internal components from wear. Unlike motor oil, you usually don’t have to worry about how to add transmission fluid unless your car has a leak. … Your car may skip gears.
Can I use oil dipstick to check transmission fluid?
How to Check Transmission Fluid Level. The transmission fluid dipstick is similar to the oil dipstick, while the oil dipstick measures the level of the car’s engine oil, transmission dipsticks measure the level of transmission fluid in your vehicle.
Can you check transmission fluid when car is hot?
Typically, the fluid level is checked both hot and cold in order to provide a cross check. Checking initially when cold is easier as you are not hovering over a hot engine holding a hot dipstick. … The reason for checking when both hot and cold is transmission fluid expands as it is heated.
What does hot and cold mean on transmission stick?
Pull out the transmission dipstick. … Pull the dipstick out again and check the fluid level. If the engine is cool, it should be at the upper end of the “COLD” mark. If the engine is hot, the level should be at the upper end of the “HOT” mark. If it’s lower, you should add some amount of automatic transmission fluid.
How long do you let your car run to check transmission fluid?
1) Prepare the Vehicle
Let it run for about 5 minutes so that it can warm up. Some car manufacturers will recommend you turn the engine off before checking the transmission fluid, but most don’t recommend this.