# How many cc is a 16 hp motor?

Contents

How many cc is a 16 hp engine? A 16 horsepower engine is approximately 240 cc. This is not a perfect conversion because cc’s are a measurement of an engine’s displacement whereas horsepower is for its power.

## How many HP is 205 cc?

Briggs & Stratton 13L332-0036-F8 Horizontal Vanguard engine is 205cc and puts out 6.5 HP. This OHV single-cylinder Vanguard has a 3/4″ x 2-27/64″ crankshaft. The engine has a recoil starter and includes a muffler.

## How many HP is 150 cc?

The general rule is for every 15 CC there is 1 HP. For example, for a 150 CC engine you would take 150 divided by 15, which equals 10 HP.

## How much horsepower is 240 cc?

A 16 horsepower engine is approximately 240 cc.

## How many cc is a 15 hp engine?

Fuel Type: Gasoline. Horse Power: 15. Engine Displacement (CC): 420.

## What HP is a 200cc engine?

Example #1: How Much HP Is 200 cc? Hence, a 200cc or 0.2L small, four-cycle engine has a horsepower of about 6.21.

## How much horsepower is a 250cc engine?

There’s no direct correlation between horsepower and a 250cc engine, since horsepower measurement depends on other factors, but a broad estimate is 15 to 16 horsepower in a 250cc engine.

INTERESTING:  Frequent question: What is the easiest car engine to rebuild?

## How many horsepower is 305cc?

Briggs & Stratton 19L232-0036-F1 305cc 10.0 Gross HP Vanguard Engine with a 1-Inch Diameter by 2-29/32-Inch Crankshaft Tapped 3/8-24-Inch.

## How many HP is 125cc?

What is the power measurement for my walk/push mower engine?

Engine Series Gross HP
125cc 450 3.00
140cc 500 3.25
140cc 550 3.75
150cc 625 4.25

## How many cc is a 3.5 HP?

HORSEPOWER 3.5 (2.61 kW) BORE & STROKE 2.50 x 1.938 in. (63.51 x 49.23 mm) DISPLACEMENT 9.52 cu.

## How many HP is 160cc?

The net power output is 4.6 HP. At 2500rpm, the Net Torque is 6.9-pound-Feet. The rotation of the PTO shaft is counterclockwise.

## What HP is 243 cc?

Cub Cadet 243cc 26″ HP 2 Stage Snow Blower.

## How many cc is a 10 hp engine?

A rule of thumb for small, 4-cycle, utility engines is 32.5cc per horsepower. By this formula a 10 hp engine would have a displacement of 325cc. Some variation can be expected between different manufacturer’s, models and RPM ratings. Many, if not most, 4-cycle, utility engines are rated at 3600 RPM.

## How many cc is a 9 horse motor?

Specifications

Engine Type Air-cooled 4-stroke OHV
Displacement 270 cm3
Net Power Output* 8.5 HP (6.3 kW) @ 3,600 rpm
Net Torque 14.1 lb-ft (19.1 Nm) @ 2,500 rpm
PTO Shaft Rotation Counterclockwise (from PTO shaft side)